Pneumatic Control Valves

Flosteer Spring & Diaphragm Type Actuator operated Pneumatic Control Valves & ON-OFF Valves are rugged, reliable units specially designed for use in Air, Steam, Water, Gas, Vapor, Process and other application. Flosteer also include mixing & diverting type Three Way Control Valves.

Motorised Electrical Actuator Operated 3 Way Globe Control Valve
Motorised Electrical Actuator Operated 3 Way Globe Control Valve
Motorised Electrical Actuator Operated 2 Way Globe Control Valve
Motorised Electrical Actuator Operated 2 Way Globe Control Valve
Spring & Diaphragm actuated operated Pneumatic Control Valve
Spring & Diaphragm actuated operated Pneumatic Control Valve
Spring & Diaphragm actuated operated Pneumatic Control Valve
Spring & Diaphragm actuated operated Pneumatic Control Valve

VARIETY OF CONTROL VALVES ARE
MANUFACTURED BY FLOSTEER SUCH AS:

  • Globe Control Valve

  • Knife Gate Control Valve

  • Ball Control Valve

  • Butterfly Control Valve

  • Flush Bottom Control Valve

  • Diaphragm Control Valve

FLOSTEER CONTROL VALVES ARE AVAILABLE WITH

  1. Pneumatic Spring & Diaphragm Type Actuator Operated
    a. Direct Acting Type
    b. Reverse Acting Type

  2. Pneumatic Piston Cylinder Actuator Operated

  3. Single Phase Electrical Actuator Operated

  4. Three Phase Electrical Actuator Operated

  5. Pneumatic Rotary Actuator Operated for Ball & Butterfly Valves

Different types of Accessories are also available with Control Valves such as Valve Positioner, I/P Converter, Solenoid Valve, Limit Switch, Air Filter Regulator, and Manual Override.

Standards:
Type Two Way / Three Way
Body Globe Type
Characteristics Equal Percent / Linear / On-Off
Diaphragm Actuator Type Direct Acting / Reverse Acting
Action Normally Open / Normally Close
Guide Top Guided / Bottom Guided / Top & Bottom Guided / Cage Guided
Size Range ˝” To 8”
End Connection Flanged End To ANSI B 16.5 / BS 10 Table / DIN / JIS / IS Std.
Socket Weld End To ANSI B 16.11
Screwed End To ANSI B 1.20.1
Pressure Rating 150# To 600# / PN 10 To PN 60
Material of Construction IS 210 GR. FG 200 / 220 (Cast Iron)
ASTM A 216 GR. WCB / WC 6 / WC 9 / WC 11
ASTM A 351 GR. CF 8 / CF 8M / CF 3 / CF 3M
Hast Alloy / Alloy 20
Trims AISI 410/304/316/304L/316L/Hast Alloy/Alloy 20

 

 

Home | Company Profile | Quality | Clients | Contact | Sitemap
Flosteer.com all rights reserves